![LBP](https://www.walkermagnet.com/content/uploads/2020/04/lbp_sm.jpg) |
|
Electromagnetic chuck suitable for both grinding and EDM operations. |
![Ceramax](https://www.walkermagnet.com/content/uploads/2020/04/ceramax_sm.jpg) |
|
Fine division permanent chuck suitable for both grinding and EDM operations. |
![interloc](https://www.walkermagnet.com/content/uploads/2020/04/interloc_sm.jpg) |
|
Universal low-profile workholding chuck that offers maximum effective holding on the widest range of workpiece shapes and sizes. |
![neomicro](https://www.walkermagnet.com/content/uploads/2020/04/neomicro2_sm.jpg) |
|
Permanent magnetic micro pitch design chucks that are ideal for reliable clamping of very thin and small components for precision grinding. It holds large workpieces as well. |
![TBP](https://www.walkermagnet.com/content/uploads/2020/04/tbp.jpg) |
|
Transverse bar pole chucks specially designed for smaller, thinner workpieces and tool steel. |
![NeoStar](https://www.walkermagnet.com/content/uploads/2020/04/neostar_sm.jpg) |
|
Permanent rotary magnetic chucks that have a radial pole design with neodymium (rare earth) magnet for holding rings and bearing races, as well as solid rounds. |
|
|
|
![Mulitpole](https://www.walkermagnet.com/content/uploads/2020/04/multi-pole.jpg) |
|
Rotary electromagnetic and electro-permanent chucks are made in radial pole multi-coil design for use in hard turning and free state grinding. The radial pole design is recommended for holding circular workpieces such as rings and discs. |
![](https://www.walkermagnet.com/content/uploads/2019/09/TORBOMILL-2-300x120.jpg) |
|
Electro-permanent magnetic workholding chucks designed for light to heavy milling applications. |
![NeoMill](https://www.walkermagnet.com/content/uploads/2020/04/neomill_sm.jpg) |
|
Permanent magnetic chucks are designed using neodymium magnets for milling applications. |
![Smart B](https://www.walkermagnet.com/content/uploads/2020/04/smartb_sm.jpg) |
SMART-B SERIES |
Automatic release chuck control. Full, variable and residual holding. Designed to be used with electromagnetic chucks. |
![Smart B](https://www.walkermagnet.com/content/uploads/2020/04/smartb_sm.jpg) |
SMART-C SERIES |
Automatic release chuck control. Full, variable and residual holding. Designed to be used with electromagnetic chucks |
![Smart D](https://www.walkermagnet.com/content/uploads/2020/04/smartb_sm.jpg) ![](https://www.walkermagnet.com/content/uploads/2020/04/smartcabinet.jpg) |
SMART-D SERIES |
Automatic release chuck control. Full, variable and residual holding. Designed to be used with electromagnetic chucks |
![SCV 1.5](https://www.walkermagnet.com/content/uploads/2020/04/SCV15_sm.jpg) |
SCV SERIES |
Manual release chuck control designed to be used with electromagnetic chucks. |