Neomicro²
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
The Neomicro², is new and improved, replacing the Neomicro. This type of chuck is designed to reliably hold a large range of workpiece sizes, from very small and thin up to large, for precision grinding jobs. |
Uses
- Ideal for reliable clamping of very thin and small components for precision grinding. It holds large workpieces as well.
Standard Features and Benefits
- Unique actuating mechanism eliminates switching deformation
- Uniform magnet force distribution over the entire working area
- Neodymium magnetic system generating 30 % higher force compared to other micropitch chucks
- Maximum workholding surface 100% active with no weak areasVery low magnetic field allowing easy disposal of grinding swarf
-
Low height allowing maximum wheelhead clearance and ability to use the Neomicro on top of another chuck
| Specs | ||
| A x B (mm) | C (mm) | Weight (Kg) |
| 100 x 70 | 49 | 3 |
| 150 x 100 | 49 | 6 |
| 175 x 100 | 49 | 7 |
| 200 x 100 | 49 | 8 |
| 250 x 100 | 49 | 10 |
| 250 x 130 | 49 | 13 |
| 150 x 150 | 51 | 9 |
| 250 x 150 | 51 | 15 |
| 300 x 150 | 51 | 18 |
| 350 x 150 | 51 | 22 |
| 450 x 150 | 51 | 28 |
| 400 x 200 | 51 | 33 |
| 450 x 200 | 51 | 37 |
| 500 x 200 | 51 | 41 |
| 600 x 200 | 51 | 49 |
| 500 x 250 | 56 | 56 |
| 500 x 300 | 56 | 67 |
| 600 x 300 | 56 | 81 |
|
|||
|
