Ferromax
permanent rotary magnetic chuck
 These permanent rotary chucks provide dependable magnetic holding for rotary surface grinding, many lathe applications, and auxiliary tooling applications. The entire top plate is magnetic with each pole individually magnetized by powerful ceramic permanent magnets, so that electrical controls and collector rings are not required. Frequent magnetic polarity changes prevent magnetization of tool bits.
Uses
- Rotary surface grinding
- Lathe applications
- Auxilary tooling applications
Standard Features and Benefits
- Each pole is magnetized by powerful ceramic permanent magnets
- Frequent magnet polarity changes result in low magnet field to prevent magnetization of tool bits
- Electrical controls and collector rings are not required
Specs
6.063
|
2.75
|
5 |
.125
|
.625
|
.875
|
5.625
|
4 |
5/16-18 |
.75
|
16 |
7.875
|
3.063
|
6 |
.219
|
.875
|
.875
|
7.25
|
4 |
5/16-18 |
.75
|
26 |
9.875
|
3.063
|
8 |
.188
|
.875
|
.875
|
9.375
|
4 |
5/16-18 |
.75
|
37 |
11.813
|
3.063
|
10 |
.188
|
.875
|
.875
|
11.25
|
4 |
5/16-18 |
.75
|
59 |
13.75
|
3.063
|
12 |
.219
|
.875
|
.875
|
13.25
|
4 |
5/16-18 |
.75
|
88 |
15.75
|
3.938
|
12 |
.25
|
.875
|
.875
|
14.875
|
6 |
3/8-16 |
.75
|
123 |
| 17.75* |
3.938
|
14 |
.25
|
.875
|
.875
|
17 |
6 |
3/8-16 |
.75
|
170 |
| 19 * |
3.938
|
16 |
.25
|
.875
|
.875
|
18.875
|
6 |
3/8-16 |
.75
|
187 |
| All measurement in inches |
| * Has 2 On and Off Switches |
Sizes available from 25 to 2300 watts. Contact factory for detailed specs and pricing.
|
