Neomill Permanent Magnetic Milling ChuckProduct Literature

Neomill Permanent Magnetic Milling Chuck

These permanent magnetic chucks are designed using Neodymium magnets for milling applications. The dual Neodymium magnet pack generates an exceptionally high holding force on workpieces with an uneven or rough contact surface.

Request a Quote Learn more

Uses

  • Heavy to light milling for workpieces

Standard Features and Benefits

  • Double Neodymium magnet pack generates a powerful holding force on workpieces with an uneven or rough surface
  • Low magnetic field, concentrated over the top plate without stray fields. No chip contamination of workpiece surface and cutting tool
  • Transverse, close pole division 11 mm of steel and 4 mm of brass allows optimal holding of workpieces only 26 mm long and 6 mm thick. The top plate can be drilled and tapped to accommodate pins, pegs or other clamping aids
  • Vibrations are dampened, contributing to machining accuracy
  • Nominal holding force: 174 lb/inĀ²
  • Usable top plate life: 5 mm
  • Supplied with Allen key, set of clamps and manual
  • Ideal for milling small to large workpieces

Specs

Item NumberWIDTH (inch)LENGTH (inch)HEIGHT (inchWEIGHT (lbs)*WIDTH (metric)LENGTH (metric)HEIGHT (metric)WEIGHT (kg)*
CP0610MIL6"10"2.2"37.4150mm250mm5617
CP0612MIL6"12"2.2"48.4150mm300mm5622
CP0614MIL6"14"2.2"52.8150mm360mm5624
CP0618MIL6"18"2.2"68.2150mm450mm5631
CP0812MIL8"12"2.2"57.2200mm300mm5626
CP0816MIL8"16"2.2"77200mm400mm5635
CP1016MIL10"16"2.2"99250mm400mm5645
CP1020MIL10"20"2.2"123.2250mm500mm5656
CP0818MIL8"18"2.2"77200mm450mm5635
CP0820MIL8"20"2.2"96.8200mm500mm5644
CP0824MIL8"24"2.2"114.4200mm600mm5652
CP1024MIL10"24"2.2"149.6250mm600mm5668
CP1220MIL12"20"2.5"154300mm500mm6470
CP1224MIL12"24"2.5"184.8300mm600mm6484
*Weights are approximate net values. Shipping weights will be higher.
OTHER SIZES AVAILABLE - PLEASE CONTACT US FOR MORE INFORMATION.