LIFTING MAGNETS

NEO-hv series

These are lifting magnets designed to lift loads from horizontal into vertical position and vice-versa.
Imagine you have a plate lying on a pallet and you want to put it onto the double sider of your horizontal machining center.

Many an operator has to do this many times a day and is usually struggling with clamps, slings or chains, often with two persons, to turn and keep the component in position. The range comprises 2 standard models: NEO-HV 250 and NEO-HV 500 for flat or box shaped workpieces, maximum workload 250 and 500 kg respectively.
Lifting arms, HV 250 and HV 500 can be purchased separately and retrofitted to a corresponding, existing NEO magnet. Models with a bigger capacity as well as special executions for round material can be supplied upon request.

FEATURES

• Standard NEO lifting magnet
• Detachable lifting arm
• Magnet is ajustable to suit a range of diameters or widths
• Supplied with manual, test certificate and CE declaration of conformity

APPLICATION

The NEO series permanent lifting magnets requires good surface conditions to achieve maximum lifting capacity. Thanks to Neodymium magnets they perform very well on unmachined surfaces with rust or scale. The NEO-HV model is ideally suited for in-plant handling, loading und unloading machine tools with horizontal spindle and for plate handling in warehouses

Workload Limit (Rated Lift Capacity)

The maximum workload is based upon lifting clean, smooth, flat, low-carbon steel plate, 30 mm or thicker with the full area of the magnet's pole area in contact with the load. Derating is required for plates or flat material with rust or scale, unmachined or uneven surface, plates thinner than 30 mm and alloy steels. Refer to the operator's manual for more detailed workload limits.

SPECIFICATIONS

• workholding & clamping
• Lifting
  magnets
  
  
• Heavy lifting & magnetic systems
  
  boring & drilling
• Additional Products
• & Services

• Literature Request