surface grinding chucks

Uniperm

The close pole division of 7/4/7/6 mm provides workpiece holding with a length from 30 mm and a thickness from 4 mm and up.

Uniperm The Epegrip has a pole division of 14/8 mm, this makes the holding of workpieces with a lenght from 40 mm and a thickness of 9 mm possible.

Specificaitons

Model	l X W	H	WT. (KG)	CONTROL UNIT
POWERFINE	335x150	83	25	BUR 5
UNIPERM	350x300	83	52	BUR 5
UNIPERM	406x200	83	44	BUR 5
UNIPERM	406x300	83	58	BUR 5
UNIPERM	450x150	83	34	BUR 5
UNIPERM	450x175	83	40	BUR 5
UNIPERM	450x200	83	48	BUR 5
UNIPERM	500x200	83	65	BUR 5
UNIPERM	500x250	83	71	BUR 5
UNIPERM	500x300	83	81	BUR 5
UNIPERM	600x200	83	79	BUR 5
UNIPERM	600X250	83	81	BUR 5
UNIPERM	600x300	83	97	BUR 5
UNIPERM	600x350	92	125	BUR 5
UNIPERM	600x400	92	133	BUR 5
UNIPERM	686x200	92	76	BUR 5
UNIPERM	686x250	92	94	BUR 5
UNIPERM	686x300	92	112	BUR 5
UNIPERM	686x350	92	156	BUR 5
UNIPERM	686x400	92	166	BUR 5
UNIPERM	800x300	92	129	BUR 5
UNIPERM	800x350	92	171	BUR 5
UNIPERM	800x400	106	214	BUR 10
UNIPERM	1000x300	106	187	BUR 10
UNIPERM	1000x350	106	241	BUR 10
UNIPERM	1000x400	106	276	BUR 10
UNIPERM	1200x400	106	295	BUR 10

EPEFINE	1200x500	95	305	BUR 10
EPEFINE	1200x600	95	319	BUR 10
EPEFINE	1300x400	95	330	BUR 10
EPEFINE	1300x500	95	416	BUR 10
EPEFINE	1300x600	100	617	BUR 10
EPEFINE	1500x400	105	352	BUR 10
EPEFINE	1500x500	105	522	BUR 10
EPEFINE	1500x600	105	617	BUR 10
EPEFINE	2000x400	105	630	BUR 10
EPEFINE	2000x500	105	787	BUR 20
EPEFINE	2000x600	105	945	BUR 20
Supplied with 3m power cord, backrest and endstop. Additional sizes available upon request.