LHS Home LHS Products and Services LHS Resources LHS News LHS Contact Us

milling

 

NeomillNeomill

Permanent magnetic chucks with neodymium magnets for milling applications

Double neodymium magnet pack generates an exceptionally high holding force on workpieces with an uneven or rough contact surface.

 

features

  • Double Neodymium magnet pak generates a powerful holding force on workpieces with an uneven or rought surface
  • Low magnetic field, concentrated over the top plate without stray fields. No chip contamination of workpiece surface and cutting tool
  • Transverse, close pole division 11 mm of steel and 4 mm of brass allows optimal holding of workpieces only 26 mm long and mm thick. The top plate can be drilled and tapped to accommodate pins, pegs or other clamping aids
  • Vibrations are dampened, contributing to machining accuracy
  • Nominal holding force: 120 N/cm2
  • Usable top plate life: 5 mm
  • Supplied with allen key, set of clamps and manual
  • Ideal for milling small to large workpieces

specifications

 

code l x w h weight
Neomill Brochure
click here to download brochure
(MM) (MM) (KG)
35.15.025 250 x 150 56 17
35.15.035 350 x 150 56 24
35.15.045 450 x 150 56 31
35.20.030 300 x 200 56 26
35.20.040 400 x 200 56 35
35.20.050 500 x 200 56 44
35.20.060 600 x 200 56 52
35.25.040 400 x 250 56 45
35.25.050 500 x 250 56 56
35.25.060 600 x 250 56 68
35.30.050 500 x 300 64 70
35.30.060 600 x 300 64 84