LIFTING MAGNETS
NEO-hv series
Permanent Magnetic Lifting Magnets
for vertical loading onto machine centers and lathes
These are lifting magnets designed to lift
loads from horizontal into vertical position and vice-versa.
Imagine you have a plate lying on a pallet and you want
to put it onto the double sider of your horizontal machining
center.
Many an operator has to do this many times
a day and is usually struggling with clamps, slings or chains,
often with two persons, to turn and keep the component in
position. The range comprises 2 standard models: NEO-HV
250 and NEO-HV 500 for flat or box shaped workpieces,
maximum workload 250 and 500 kg respectively.
Lifting arms, HV 250 and HV 500 can be purchased separately
and retrofitted to a corresponding, existing NEO magnet. Models
with a bigger capacity as well as special executions for round
material can be supplied upon request.
FEATURES
- Standard NEO lifting magnet
- Detachable lifting arm
- Magnet is ajustable to suit a range of diameters or widths
- Supplied with manual, test certificate and CE declaration
of conformity
APPLICATION
The NEO series permanent lifting magnets requires good surface conditions
to achieve maximum lifting capacity. Thanks to Neodymium magnets
they perform very well on unmachined surfaces with rust or scale.
The NEO-HV model is ideally suited for in-plant handling, loading
und unloading machine tools with horizontal spindle and for plate
handling in warehouses
Workload Limit (Rated Lift Capacity)
The maximum workload is based upon lifting clean,
smooth, flat, low-carbon steel plate, 30 mm or thicker with
the full area of the magnet's pole area in contact with the
load. Derating is required for plates or flat material with
rust or scale, unmachined or uneven surface, plates thinner
than 30 mm and alloy steels. Refer to the operator's manual
for more detailed workload limits.
SPECIFICATIONS
| DESCRIPTION |
NEO-hv 250 |
NEO-hv 500 |
hv 250 |
hv 500 |
|
| CODE |
44.15.250 |
44.15.500 |
44.00.972 |
44.00.973 |
| Workload Limit Flat Material |
250 |
500 |
250 |
500 |
(kg) |
| Tested Break-Away Force |
750 |
1500 |
- |
- |
(daN) |
| Workpiece range |
300-800 |
300-1000 |
300-800 |
300-1000 |
(mm) |
| Min. Workpiece Thickness |
4 |
6 |
- |
- |
(mm) |
| Length |
958 |
1158 |
958 |
1158 |
(mm) |
| Width |
210 |
275 |
210 |
210 |
(mm) |
| Height |
255 |
255 |
255 |
255 |
(mm) |
| Weight |
27 |
39 |
17 |
20 |
(kg) |
Bigger capacities on request. |
|
